Basic info

Product Size:

Product Description:

A 14-inch diamond blade is commonly used for cutting through concrete in various construction projects. Here are the specifications of a typical 14-inch diamond blade for concrete:

1. Size: The blade has a diameter of 14 inches, which is the standard size for concrete cutting.

2. Arbor size: The arbor hole size is usually 1 inch, which fits most concrete saws.

3. Segment height: The segment height is the depth of the diamond part of the blade. For a 14-inch diamond blade for concrete, the segment height can range from 10mm to 12mm.

4. Segment shape: The segment shape can vary, but for concrete cutting, the segments are usually rectangular with a slight curve at the corners.

5. Bond type: The bond type determines how the diamond particles are held together in the blade. For cutting through concrete, a hard bond is typically used to withstand the abrasiveness of the material.

6. Diamond concentration: The diamond concentration refers to the amount of diamond particles in the blade. Higher diamond concentration results in a faster and more efficient cut.

7. Usage: The blade is designed for cutting through concrete, but can also be used for cutting through other materials like asphalt, brick, and stone.

8. Wet or dry cutting: The blade can be used for both wet and dry cutting, depending on the job requirements.

9. Speed: The maximum speed of the blade should not exceed the recommended RPM (rotations per minute) for the saw being used.

Features:

1)     Higher quality diamond and long life.

2)     Dry or wet cutting.

3)     Applicable for table saw, walk-behind saw, hand held saw.

4)     Professional quality grade.

5)     1" arbor with drive pin holes standard. Custom arbor sizes are available.

6)     Other special specifications and colors can be produced by clients' require

This is 350mm/14 inch diamond blade for concrete, If you need other blade, please check our product categories.